Simple Simulation Example: Inverter with HV-Filter
FFT-Spectrum with Bandwidth-Weighing*
*Unfortunately no original limits can be shown here, as those are protected by
copy rights or by non-disclosure-agreements
Post-Processor
Such a configuration is typical for a Drive Train System inside an Electric Vehicle. The Inverter chops the direct current from the battery, puts it together as three-phase alternating current and thus drives the motor.
The HV-Filter shall protect the battery and the environment against disturbances, which are emitted during the “chopping” job by the Inverter.
The simulation example shows the limited effect of a standard HV-Filter quite graphic.
With the help of our Simulation-Tools, specifically adapted and optimized HV-Filters can be designed and realistically tested – including the load and stress of all filter elements.
Click on the image to zoom in and out
more...
CM-Magnet-Cores with Saturation and Frequency-Characteristic
Tip
Shielding
Interference Analysis & Suppression
© Ingenieurbüro Lindenberger 8447